![T-stylus M3 XXT, DK0.5 L8.5 product photo Front View L](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/L/961_1644585954985.png)
![T-stylus M3 XXT, DK0.5 L8.5 product photo](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/S/961_1644585954985.png)
M3 XXT, T-Stylus with clamping adapter, stepped, ruby sphere, tungsten carbide shaft
T-stylus M3 XXT, DK0.5 L8.5
T-styli for measuring opposing bores, grooves, undercuts, cylinder and bore diameters
- Clamping ring with 2 horizontal single styli
- For adaptation to standard extensions
- Spherical styli have the same probing behavior in all directions
- Ruby is the most common spherical material
- Ruby spheres available from 0.2 to 12 mm
- tungsten carbide shaft with high rigidity
- Higher stability through stepped shaft
- Proven ZEISS quality through high-end production
- Product Type
- Stylus
- Connection Type
- M3 XXT
- Length (L)
- 8.5 mm
- Ø Body (DG)
- 5.0 mm
- Ø Shaft (DS)
- 1.0 mm
- Ø Sphere (DK)
- 0.5 mm
- Measurement Length (ML)
- 2.3 mm
- Stylus Type
- T-Stylus
- 2nd Ø Shaft (DSE)
- 0.3 mm
- Stylus Tip Geometry
- Sphere
- Stylus Tip Material
- Ruby
- Shaft Material
- Tung. Carb.
- Width (B)
- 25.0
- Application
- Tactile
- Weight
- 1.0 g
Product note
It is not recommended to mix M3 RENISHAW elements with ZEISS XXT systems. The differnt base diameters may cause a loose connection, resulting in measuring errors.
Depending on the material of the stylus and the workpiece, wear or material deposits may collect on the stylus. Therefore, regularly check your styli under a microscope and clean or replace them if damaged. Depending on the type and degree of contamination, a wide range of cleaning agents are available. ZEISS application engineers recommend stylus cleaning wipes or microfiber cloths.