Original adapter plate with star angle piece and extension.Interchangeable plates with 8x45° cube are used, among other things, for gear measurement without a rotary table. They are preferably used for external gearing of the cylindrical gear type. Typical 8-fold star probe systems can be set up with this adapter plate. The CFX 3-disc extension corresponds to a standard extension with LE 70.
- ID chip label 100% identification of the correct probe system in the firmware/software to avoid collisions and incorrect measurements
- Safe handling of the stylus system (no incorrect pick-up possible in the stylus scoket)
- Improvement of system performance (VAST Performance FlyScan QuickChange)
- More information on the control panel display (name, coordinates, measuring force, angle)
- product type
- Extension
- Connection Type
- M5
- Length (L)
- 70.0 mm
- Application
- Extend
- Ø Body (DG)
- 20.0 mm
- Meas. Len.
- 110.5 mm
- Material
- Carbon Fiber
- Connection Type Out
- M5
- 1. Angle (°)
- 45.0 °
- Width (B)
- 29.0
- Weight
- 200.0 g
- Accuracy Level
- Medium - CFX 3
Combinable sensor technology: VAST probe heads (VAST XT Gold and VAST Gold) for probe VAST XTR gold: no rotation functionality (collision protection ring is mandatory)Usable options: VAST Performance Kit FlyScan and QuickChangeCombinable probe socket: MT/VAST probe socket 600660-8365-000A maximum weight of 800 g may be suspended from the adapter plate, (adapter plate included). The length of a stylus system may not exceed 800 mm.Adapter plate MT/VAST, M5,8-sided titanium cube, ZEISS REACH CFX 3, D20, L70, ML110,5, DG29, B15, weight: 200gVAST adapter plate with an extension, 8-sided titanium cube and active ID chipNot included in the scope of delivery: Collision protection ring: 600664-8410-000 and labeling clips 626119-0010-000
Product note
The features of ZEISS measuring machines and the guaranteed machine specifications are only guaranteed when using original ZEISS exchangeable plates. All functions of the VAST Performance Kit can only be used in combination with ZEISS exchangeable plates. There is a not insignificant negative influence on accuracy and stability if adapter plates from unknown / non-certified manufacturers are used.Check the necessity of performing the DeviceActovator when using a new ZEISS adapter plate. Further information and operating instructions are available at the following link in the Download Center: https://portal.zeiss.com/download-center/softwares/imt
