M3, Styli straight, diamond coated sphere, tungsten carbide shaft
Diamond!Scan© mono Stylus straight M3, DK3 L45.5
Spherical styli have the largest field of application because they have the same probing behavior in every direction. They are therefore suitable for all common measuring tasks such as measuring bores and surfaces. The larger the stylus sphere size, the larger the mechanical filter. This means that the profile of your workpiece is smoothened, which is often required in form measurement. The deviation from the ideal sphere shape is usually shown in Grade. ZEISS styli spheres have Grade 5 as standard, but can also be offered in a higher Grade 3 for special requirements. Styli with a straight shaft are the most simple designed styli. The full shaft length can be used as measuring length.
- Diamond coated stylus sphere that can be used for nearly all materials and surfaces
- Better roundness than solid diamond spheres
- Carbide shaft with high stiffness
- Straight shaft with longer measuring length
- Proven ZEISS quality through the use of selected materials
- Product Type
- Stylus
- Connection Type
- M3
- Length (L)
- 45.5 mm
- Ø Body (DG)
- 4.0 mm
- Ø Shaft (DS)
- 2.0 mm
- Ø Sphere (DK)
- 3.0 mm
- Measurement Length (ML)
- 39.5 mm
- Stylus Type
- Straight
- Stylus Tip Geometry
- Sphere-Segment
- Stylus Tip Material
- Diamond Coated
- Shaft Material
- Tung. Carb.
- Application
- Tactile
Product note
Depending on the material of the styli and the workpiece, wear of the styli may occur. Therefore, we recommend to check the styli regularly for wear. Also remember to clean the styli or replace them if necessary. ZEISS Styli Cleaning Wipes are available. To learn more about ZEISS styli, book our free stylus eLearning on the ZEISS eLearning platform.
Recently Viewed
