![L-stylus, DK1.5 L233.2 product photo Front View L](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/L/1080_1694062608664.png)
![L-stylus, DK1.5 L233.2 product photo](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/S/1080_1694062608664.png)
L-styli without thread straight, silicon nitride sphere, tungsten carbide shaft
L-stylus, DK1.5 L233.2
626111-5000-043
Application
L-styli for measuring undercuts and horizontal bores. Styli without thread for use with special mounting adapters.
- SiN for less material deposits
- SiN spheres available from 0.3 up to 12 mm
- Tungsten carbide shaft with high rigidity
- Straight shaft with longer measuring length
- Proven ZEISS quality through high-end manufacturing
Details
- Product Type
- Stylus
- Connection Type
- Without thread
- Length (L)
- 233.2 mm
- Ø Shaft (DS)
- 6.0 mm
- Ø Sphere (DK)
- 1.5 mm
- Stylus Type
- L-Stylus
- 2nd Ø Shaft (DSE)
- 0.8 mm
- Stylus Tip Geometry
- Sphere
- Stylus Tip Material
- Si. Nitride
- Shaft Material
- Tung. Carb.
- Width (B)
- 12.0
- Application
- Tactile
- Weight
- 94.5 g
Product note
Depending on the material of the stylus and the workpiece, wear or material deposits may collect on the stylus. Therefore, regularly check your styli under a microscope and clean or replace them if damaged. Depending on the type and degree of contamination, a wide range of cleaning agents are available. ZEISS application engineers recommend stylus cleaning wipes or microfiber cloths.