![L-stylus M5, DK1 L85.5 product photo Front View L](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/L/1031_1644830574756.png)
![L-stylus M5, DK1 L85.5 product photo](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/S/1031_1644830574756.png)
M5, L-styli angled stepped, ruby sphere, tungsten carbide shaft
L-stylus M5, DK1 L85.5
626115-5000-898
Application
Angled L-styli for measuring undercuts and angled bores. M5 thread for VAST active scanning sensors.
- Spherical styli have the same probing behavior in every direction
- Ruby is the most common sphere material
- Ruby sphere available from 0.2 up to 12 mm
- Tungsten carbide shaft with high rigidity
- Higher stability through stepped shaft
- Angled geometry for special angular positions
- Proven ZEISS quality through high-end manufacturing
Details
- Product Type
- Stylus
- Connection Type
- M5
- Length (L)
- 85.5 mm
- Ø Body (DG)
- 11.0 mm
- Ø Shaft (DS)
- 5.0 mm
- Ø Sphere (DK)
- 1.0 mm
- Measurement Length (ML)
- 72.5 mm
- Stylus Type
- L-Stylus
- 2nd Ø Shaft (DSE)
- 2.0 mm
- 2nd Measurement Length (MLE)
- 35.5 mm
- Stylus Tip Geometry
- Sphere
- Stylus Tip Material
- Ruby
- Shaft Material
- Tung. Carb.
- 3rd Measurement Length (MLF)
- 6.0 mm
- 3rd Ø Shaft (DSF)
- 0.7 mm
- Width (B)
- 8.0
- Application
- Tactile
Product note
Depending on the material of the stylus and the workpiece, wear or material deposits may occur. Therefore, regularly check your styli under a microscope and remember to clean them or replace them if damaged. Depending on the type and degree of contamination, a wide range of cleaning agents are available for cleaning. ZEISS application engineers recommend stylus cleaning wipes or microfiber cloths.