![Adapter plate ST3, set of 2 product photo Front View L](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/L/1925_1706770581185.jpg)
![Adapter plate ST3, set of 2 product photo](/INTERSHOP/static/WFS/IMT-US-Site/-/IMT/en_US/S/1925_1706770581185.jpg)
Adapter plate ST3, set of 2
Adapter plate for the ST3 probe head.
- Product Type
- Adapter Plate
- Connection Type
- M5
- Measuring Sensor
- ST/ST3
- Application
- Tactile
- Weight
- 136.0 g
A maximum weight of 200 g may be suspended from the adapter plate, including the adapter plate. The length of a stylus system including extension must not exceed 200 mm. 136 g/pc.
Two ST3 adapter plates
Product note
The features of ZEISS measuring machines and the guaranteed machine specifications are only guaranteed when using original ZEISS exchangeable plates. There is a not insignificant negative influence on accuracy and stability if adapter plates from unknown / non-certified manufacturers are used. Check the necessity of performing the DeviceActovator when using a new ZEISS adapter plate. Further information and operating instructions are available at the following link in the Download Center: https://portal.zeiss.com/download-center/softwares/imt