T-shaped, pre-aligned multiple probe holder with original VAST adapter plate. Multiple probe holders are used, among other things, for gear measurement with rotary table. They are preferably used for external gears of the cylindrical gear, bevel gear, worm, rotor/screw compressor and hob type. Several probes and extensions can be attached. All titanium cubes are aligned and firmly bonded to this T-shaped fixture. The spacer tubes are made of thermostable ZEISS Reach CFX3 extensions.
- ID chip label 100% identification of the correct probe system in the firmware/software to avoid collisions and incorrect measurements
- Safe handling of the stylus system (no incorrect pick-up possible in the stylus scoket)
- Improvement of system performance (VAST Performance FlyScan QuickChange)
- More information on the control panel display (name, coordinates, measuring force, angle)
- Product Type
- Extension
- Connection Type
- M5
- Length (L)
- 70.0 mm
- Application
- Extend
- Ø Body (DG)
- 20.0 mm
- Measurement Length (ML)
- 96.5 mm
- Material
- Carbon Fiber
- Connection Type Out
- M5
- Measuring Sensor
- VAST/MT
- Width (B)
- 180.0
- Accuracy Level
- Medium - CFX 3
Combinable sensor technology: VAST probe heads (VAST XT Gold and VAST Gold) for probe VAST XTR gold: no rotation functionality (collision protection ring is mandatory) Usable options: VAST Performance Kit FlyScan and QuickChange Combinable probe socket: MT/VAST probe socket 600660-8365-000 A maximum weight of 800 g may be suspended from the adapter plate, (adapter plate included). The length of a stylus system may not exceed 800 mm. Adapter plate MT/VAST, M5, T-shaped stylus mount, ZEISS REACH CFX 3,L70, ML96,5, D20, B180, cube 20, weight: 418g
VAST adapter plate with an t-shaped extension styli mount and active ID chip Not included in the scope of delivery: Collision protection ring: 600664-8410-000 and labeling clips 626119-0010-000
Product note
The features of ZEISS measuring machines and the guaranteed machine specifications are only guaranteed when using original ZEISS exchangeable plates. All functions of the VAST Performance Kit can only be used in combination with ZEISS exchangeable plates. There is a not insignificant negative influence on accuracy and stability if adapter plates from unknown / non-certified manufacturers are used. Check the necessity of performing the DeviceActovator when using a new ZEISS adapter plate. Further information and operating instructions are available at the following link in the Download Center: https://portal.zeiss.com/download-center/softwares/imt
